| System Specification | |
|---|---|
| System Name | MP200 – Multi Profile Machine – 50mm ( 2in.) to 204mm (8in.) |
| Products | Wall Panels / Roof Trusses / Floor Joists |
| Walls | Any Wall size between 50mm ( 2in.) to 204mm (8in.) |
| Floors | Webbed Joist & Cee Purlin Flooring Systems – Any size between 50mm ( 2in.) to 204mm (8in.) |
| Trusses | P-Cord truss system (Standard) – Any size between 50mm ( 2in.) to 204mm (8in.) Cee Cord Trusses (Back to Back) – Any size between 50mm ( 2in.) to 204mm (8in.) |
| Profile Section | Any Cee or “U” section between 50mm ( 2in.) to 204mm (8in.) |
| Punching Units | Multi Punch Operation for faster production – All parts punched, cut, labelled, ready for assembly |
| Dimples | Separate Stud & Plate Dimples for better connections. |
| Service Holes | For clean water installations and electrical wiring 32 mm hole (other sizes are available on demand) |
| Web Notch | Removes the web section of the profile so that studs can pass through for Horizontal Bracing. |
| Lip Notch | Remove the lip of the C plates so that studs can be connected |
| Chamfer | Removes the corners of the studs so that it can be used as bracing in walls and webs of roof trusses |
| Anchor Hole | 13 mm hole is used for anchoring connections as well as general connections |
| Cut-off | Pre-cut system to increase the production speed. |
| Printer | Inkjet to provide “smart parts” |
| Material Grade | G350-G550 max. |
| Material Type | galvanize Steel coils |
| Material Gauge | 0.8mm (20 Ga) – 2.0mm (14 Ga) |
| Number of Machines | 1 |
| Production rate (m/hr) | |
| Wall Panels | 250-900 m/hr (depending on the design) |
| Roof Trusses | 250-500 m/hr (depending on the design) |
| Floors | 600-1200 m/hr (depending on the design) |
| Products | C & U Profiles |
| Usage | Residential dwellings or commercial buildings, dormitories, workers accommodation, hospital, university buildings |
